What’s on my lab bench?

Most people have a desk as a place of work. I’m lucky enough to have three workspaces as a chemist: my desk, my lab bench, and my fume hood, all for different aspects of chemistry research. Today I’m going to give you a tour around my lab bench!

labelled lab bench.png
Picture caption: Fiona’s busy lab bench with different items labeled, from the sink to the sample vials!

My lab bench is used to carry out low-risk tasks involving my chemical samples. Most of the work I do when handling and manipulating my reactions is carried out in a fume hood to reduce my exposure to them but small analytical tests and sample preparation can b carried out on a bench – unless my sample is particularly smelly which thankfully not many of my compounds are!

I share a sink with another chemist in my lab where we wash up our glassware. We’re a bit like a student flat in that neither of us like putting the glassware away in the cupboards so take stuff directly from the drying rack which can turn into a mountain of conical flasks and beakers sometimes!

While I use an electronic lab book for my final write-ups, I keep a rough note of what I’m doing for each experiment in these blue and while notebooks and transfer it to the ELN at the end of the experiment. If I had to grab one thing in the event of a fire, it would be these notebooks as everything else I do is digitally backed up!

I keep final products in these sample vials before transferring them to smaller ones for archive storage about once a quarter. I draw the chemical structure on the yellow circular labels to help me find samples quickly. I try to keep my samples in chronological order but it doesn’t always happen so you’ll often find me hovering over these boxes trying to find vial such and such.

Although the picture doesn’t show it too well, I have to boxes of glass pipettes on my side of the bench, individual disposable glass droppers. I have a rubber atomiser that I attach to them when I need to transfer small quantities of liquid between flasks etc. and then the glass pipette gets recycled. We have two lengths of pipette and I seem to get through the shorter ones a lot quicker than the longer ones.

The tip-ex isn’t actually for correcting written mistakes in my notebooks – I tend to just scribble. I actually use it to mark sample lids so I can differentiate them as my own from my colleagues when using shared equipment. Our group has to use black lids for our NMR tubes so I found it a simple way to identify my samples from the dozens than go on the NMR instrument carousel.

I use a ruler for drawing straight lines on my TLC plates and for measuring the distance between spots once I’ve run TLC experiments (see my How do I know I’ve made the right molecule post).

The small tubes in the little beaker are how we store samples long term. They’re obviously a lot smaller than the glass vials and we typically have less than 0.1 g of a sample left after using what we need for future chemistry. We also use these tubes for transporting samples because they have individual bar codes on them. These are six compounds that I’ve taken out of archive storage for my colleague in biology to come to get whenever she needs them.

The conical flask on my desk contains empty NMR tubes, long skinny glass tubes used to prepare a sample for a particular type of analysis that investigates the magnetic character of the compounds – again see my previous post for more detail. The tubes are capped with the black lids I cover in Tipex.

I don’t keep many chemicals on my desk but these two are for a public engagement activity I’m doing with schools soon and so because they weren’t bought using the group’s research budget, need to be stored separately from the other chemicals I use, which are typically stored under my fume hood or in one of our several filing cabinets.

A calculator is a chemist’s best friend for double checking sample dilution factors and scaling reactions up to bigger quantities (like doubling a recipe). My electronic lab book does a lot of calculations for me but there are always some that need to be done manually like converting concentrations units from % to molar etc.

I hold on to my NMR samples until I’ve definitely got everything I need to write-up an experiment. Cleaning these tubes out isn’t the most fun job in the world so I tend to wait until I have a lot of tubes to clean before the repetitive task of rinsing them out.

My colleague and I share a number of things on our bench like sample vials and empty plastic columns for purification. We try to keep them topped up for each other.

Every chemist needs gloves for handling chemicals. I try to not get through more than a couple of pairs of gloves a day having mastered the technique of removing them in such a way that they can be worn again if I know I’ve been particularly careful and not got much on them.

My green tray has samples ready for being archived. I got this from a colleague who was leaving and it’s the perfect size for storing out mini sample vials. Scientists are a bit like vultures when they know there’s a free for all during a lab clearout or someone moves job, we become quite territorial about our pieces of lab kit.

My cardboard box has random bits and pieces in it like pencils and stickers for my lab vials.

I also have a mountain of plastic rings for storing round-bottomed flasks – spherical pieces of glassware that as you can tell by the name don’t stand up very well on their own.

Sometimes I get deliveries in the post in boxes that I bring into the lab. This tiny box was the perfect size for storing my TLC plates.

The laminated sheets are for writing the reaction schemes for what’s going on in my hood if I’m leaving a reaction on overnight. It allows colleagues and security to check a reaction is running at the temperature it is supposed to and hasn’t randomly heated up or cooled down overnight.

Lastly comes my vacuum pump which is attached to my rotary evaporator. My rotary evaporator, or “Buchi” as they’re named after one particular brand that makes them, is a bit like a kettle.  Attach round-bottomed flasks to it and boil off liquid solvents that I’ve dispersed my reaction in. The vacuum pump allows me to boil te solvents off at much lower temperatures than usual.

You may know about the phenomenon where water boils at a lower temperature at the top of Everest due to the reduced air pressure. My Buchi takes this to the nth degree by creating a vacuum and can actually boil water off at 40 °C! The samples sit in the water bath which is warmed to my desired temperature and rotates to maximise even distribution and mixing of my reaction mixture while also creating a thin film of solvent which then evaporates more easily.

The shelf above my bench contains frequently used chemicals for reaction work-ups/purifications. It includes various acids, bases, substances for removing water, stuff for preparing columns and my NMR solvents. We also have parafilm, a bit like clingfilm, used to seal vials and chemical bottles to stop samples or reagents from going off.

I hope you’ve enjoyed my lab bench tour. Stay tuned for future posts about my desk and fume hood.

What’s your working space like? Let me know in the comment below.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s